Koronka Logo S KORONKA {MANUFACTURING} LTD
Scottish Flag


Early Koronka Tanks EARLY CYLINDRICAL TANKS BEING DELIVERED ::
  • Any shape or size was never a issue
EARLY CYLINDRICAL TANKS BEING DELIVERED ::
  • Koronka have always used their own fleet to ensure continuity off supply
Early Koronka Tanks

Top of Page

Open Top Bunds OPEN TO BUNDS ::
  • Open top bunds for existing cylindrical tanks
  • Left - 2 of 36 being delivered for Tarmac construction
  • Allows existing Single Skin Tanks to be reused to comply with EA & SEPA
  • Any shape or size is available

Top of Page

75 000 LITRE SINGLE SKIN TANKS FOR SCHLUMBERGER WEST AFRICA ::
  • BS 799 Part 5 Type J 1987
  • 10m long x 2.5m wide x 3.0m tall
  • Dry Weight 8.0 Ton Wet Weight 78.8 Ton
Schlumberger Tank being loaded
Sofitech Tanks leaving Kinross TANKS LEAVE FOR ONWARD SHIPPING ::
  • 4 tanks leave in convoy
    {3 in this Picture}

Top of Page

RAF STATIONS - SLOPING SIDE TANK DESIGNS

12,000 litres usable 13,000 litres actual ::
  • 4.75m long x 2.5m wide x 2.3m tall.
  • Tank elevated on 300mm high tank stand.
  • Fitted "CLA VAL" dry break connector as base standard.
  • Direct reading gauge with 4-20mA out for BMS.
  • Over Under Bund Alarm for leak detection.
  • Fail safe overfill prevention valve.
  • Finish - Shot blast SA 2.5 and 3 coats epoxy.
  • Hand rails and steps - Hot Dip Galvanised.
Avionics 1075
19,250 ltr Usable 21,000 ltr actual ::

Cons Com Special bunded pipe work
  • 5.7m long x 3m wide x 2.3m tall.
  • Fitted "CIVACON" dry break connector as base standard.
  • Internal tank manufactured with fall to rear
  • Dry Weight 7.5 Ton Wet Weight 26 Ton
  • Double skinned sump in bund
  • Steel pipe in pipe to flange for connecting to base bunded pipe work

Top of Page

GRAVITY DROP TANKER FILL POINT CABINETS

16,000 litres usable 18,000 litres actual Environmental tank ::
  • Overall dimensions: 4.15m long x 3.0m wide x 2.0m high.
  • Cabinet dimensions: 1.4m wide x 0.9m deep x 1.0m high.
  • Fitted 500 LPM Gilkes 230V pump.
  • Static Bonding Reel.
  • 80mm Sight Glass.
  • 9 Kgs Powder Extinguisher.
  • 80mm Check valve .
  • 80mm Lever valve c/w dust cap.
18 000 Ltr Environmental tank
INTERNAL OF FILL POINT CABINET ::

Cabinet Sight Glass

Gravity drop road tankers without there own discharge pumps can now fill up above ground storage tanks. Most tankers of this nature use 80mm hoses fitted to the underside of the trailer to discharge there product. Simply connect the opposite end of the hose to the cabinet fill point assembly, open both valves {Cabinet & Trailer} turn on the pump and fill up your tank.
When you have finished, close the trailer valve, disconnect the hose and walk the hose towards the pump till all the product has been sucked out of the hose and into the pipe work.
A large 80mm sight glass is fitted so you can see that there is fuel in the line. Never pump without any liquid in the pipe work. A non return valve is fitted just after the inlet valve so no fuel can come back down the fill pipe and leak out in to the cabinet.

Top of Page

OTTERNISH FERRY TERMINAL UPGRADE

35 000 Ltr Bunded tank 33,500 litres usable 35,000 litres actual Bunded tank ::
  • Overall dimensions: 4.53m long x 2.5m wide x 3.4m high.
  • Cabinet dimensions: 4.38m wide x 2.4m deep x 3.35m high.
  • Fitted 500 LPM Gilkes 230V pump.
  • 30m x 50mm Electric Rewind Hose Reel.
  • Shot Blast finish for Coastal Spec.
CAD DRAWINGS ::

Side Elevation End Elevation
BEFORE PICTURES.... ::

Existing Tank Existing tank

This new tank for Caledonian Maritime is situated on a very sensitive location on the pier at Otternish. The tank is half buried in an open top pit & open top bund that was continually filling with water creating a situation where the tank and bund was floating. Koronka manufactured a new totally enclosed bunded unit fitted rain skirt fully welded to the tank to shed any water. A small lip was then constructed on the ground so no rain water could enter the pit. A purpose built cabinet was constructed to house the pumping station and hose reel so they are contained when not in use. The whole unit is shot blasted and two pack epoxy paint finish to protect it from the harsh saline conditions off the west coast of Scotland.

Top of Page

187 000 LITRE BULK TANKS ::

187 000 Litre Bunded Tank Tanks leaving Kinross on Low Loaders
  • Design BS 799 Part 5 type J 1987.
  • 14.0m Long x 4.0m wide x 3.5m tall
  • Dry Weight 25.0 Ton Wet Weight 193 Ton
  • Fitted balancing pipework to maintain levels between tanks
  • Tanks being loaded on Low loaders for delivery to Kyle of Lochalsh

Top of Page

45 000 LITRE CYLINDRICAL BUNDED TANK FOR 95% PURE SULPHURIC ACID ::
  • Design BS 799 Part 5 type J 1987 and BS 2594 1975
  • 9.5m long x 3.0m wide x 3.2m tall
  • Dry Weight 9.0 Ton Wet Weight 54.o Ton
10 000 gallon Sulphuric Acid Tank

Top of Page

Seismically Qualified Bulk Tanks HMS Devonport 6 800 LITRE DOUBLE SKINNED DAY TANKS ::
  • BS 799 Part 5 Type J 1987
  • 2.45m long x 2.4m wide x 1.2m tall
  • Dry Weight 3.5 Ton Weight 9.9 Ton
  • Tank insulated to prevent frost waxing diesel
550 LITRE DOUBLE SKINNED DAY TANKS ::
  • BS 799 Part 5 Type J 1987
  • 2.0m long x 940mm wide x 310mm tall
  • Dry Weight 1.1 Ton Wet Weight 1.6 Ton
Seismically Qualified Bulk Tanks HMS Devonport

Top of Page

Open top Tank & Bund Units 5000 LITRE TANK IN OPEN TOP BUND ::
  • BS 799 Part 5 Type J 1987
  • 3.5m long x 1.83m wide x 1.4m tall
  • Dry Weight 1.8 Ton Wet 6.2 Ton

Top of Page

8 550 LITRE STAINLESS STEEL SINGLE SKINNED WATER TANK ::
  • BS 799 Part 5 Type J 1987
  • 3.0m long x 1.5m wide x 1.9m tall
  • Dry Weight 1.0 Ton Wet Weight 9.5 Ton
  • Hot Dip Galvanised Finish also available
Stainless Steel Open Top Water Tank

Top of Page

GENERATOR SKID BASE AND TANK UNITS ::
Skid Bases c/w Drip Trays Skid Base and Tank unit combined
  • Manufactured from Channel or Folded Section
  • Any shape or size available
  • Above units fitted driptrays
  • Skid Units below for large Cummings engines
  • Design BS 799 Part 5 type J 1987.
  • Above unit built in base tank and battery compartment

Cummings Size 5 Skid Base



Generator Bund Skids Generator Bund Skids ::
  • BS 799 Part 5 Type J 1987
  • Multiple Capacities Available
  • Various Skid Heights available

Top of Page

990 LTR BUNDED PETROL STORAGE UNITS ::

99 Ltr Bunded Petrol Tank Internal view of bunded
  • Manufactured from 3mm MS Sheet
  • Various shapes or sizes available
  • Idea for Golf Coarses & small business requiring to store petrol
  • Skid mounted to allow ventilation between bund base & floor level
  • Fitted rotary hand pump c/w m hose & delivery nozzle.
  • Fitted with flow meter to record fuel usage
  • Fitted with vent cowl / flameproof screen
  • Fire Extinguisher and 2kg Spill Kit supplied
  • Signage - labels all supplied and fitted


W3C

MENU
Home
The History
Continued


Environmental
Tank Range


Roller
Door Range


Slab-Base
Tank Range


Basic
Design Range


Aviation
Tanks


Cylindrical
Tanks


Tank
Accessories


Gallery

Used Tanks

Links &
Downloads


Contact
Us